Land clearing, rock milling and forestry mulching around Kyle, TXLand clearing and rock milling in Kyle, TX
Intex Rock & Cedar Solutions
Freshly cleared strip along a wire fence under oaks, with a deer stand beside it, fence line clearing
Our Services

Fence Line Clearing in Kyle, TX

Fence Line Clearing · Kyle, TX

A clear, level path where your fence will run

Fence line clearing opens a strip of ground along the fence you have or the one you plan. Intex Rock and Cedar Solutions takes cedar (Ashe juniper), brush, small trees and loose rock off that strip. We clear fence lines on ranches, pastures, acreage and homesites around Kyle. Your fence builder then starts on a clean, level path.

We clear the line, and the fence itself is your fence builder's work. That includes the post holes and any fence repair. If the whole lot or pasture needs work, land clearing around Kyle can join the same job. We work for homeowners and landowners, plus commercial and development jobs.

What We Handle

  • Clearing along existing fences and planned fence lines
  • Fence line clearing on ranches, pastures, acreage and homesites
  • Skid steer mulcher for tight spots and around trees you keep
  • 400 horsepower wheeled mulcher for long, open runs
  • Cedar and brush mulched in place or pushed into burn piles
  • Boulders and ledge rock broken with the hydraulic hammer
  • Loose surface rock ground in place for a level path
  • Free estimate, with the quote in writing

Request a Fence Line Clearing Quote

Tell us about the land, the work it needs and where it is. We look at the job and put a free estimate in writing.

Clearing Fence Lines Through Cedar and Rock Around Kyle

A planned fence line needs an open route before the builder can lay it out. An old fence line needs the cedar and brush cleared away from the wire. Either way, the goal is a clean strip the fence crew can work along.

Cedar and brush on the line get mulched where they stand. The skid steer mulcher works tight spots along fences and around trees you keep. On long, open runs, the 400 horsepower wheeled mulcher covers more ground. It is the same forestry mulching we do on whole pastures.

Rock on the line gets broken up or ground down. The hydraulic hammer breaks boulders and ledge rock. Loose surface rock can be ground in place into caliche base with rock milling. The fence crew then gets a level path to set posts and stretch wire.

What Should You Mark Before Fence Row Clearing?

Start with the line itself. On a boundary fence, a survey shows where the property line runs. Flag the corners, the gate openings and the run between them. Then mark each tree on the line you want kept, and we clear around it.

Public utility companies may not mark lines that run from the meter onto private property, Texas 811 says. Getting those private lines marked before digging is the owner's job. On acreage, that can mean a water line to a barn, a septic line or a buried power line. Show us each one before work starts.

Kyle adds two steps inside the city. Its own water, wastewater and stormwater lines are not part of the Texas 811 ticket. The city takes those locate requests itself. Its code also puts cedar 25 caliper inches or larger through a tree removal process, to preserve golden-cheeked warbler habitat.

Who Calls 811 After the Fence Line Is Cleared?

Post holes are the fence builder's work, and so is the 811 call for them. State law says a person who intends to excavate notifies the one-call center first. Texas 811 says there is no blanket ticket. A general contractor's ticket does not cover subcontractors.

Under that law, to excavate means using powered equipment to disturb soil 16 inches deep or more. The definition names auguring, so a powered post hole auger at that depth counts. Texas 811 says to call at least two business days before excavating, not counting weekends and holidays. State law sets the earliest notice at 14 days before the dig.

On farm and ranch land, the notice rule does not apply to activities on private property tied to agricultural operations. We still recommend the call before any post hole goes in. Texas 811 also says it helps to mark the planned worksite in white.

Cleared dirt strip running beside a barbed wire fence through cedar, seen from the machine, fence line clearing Long straight strip cleared through brush, seen from a tracked skid steer, fence line clearing

Ready to get started?

Call or text for a written quote. We work about 45 miles around Kyle across the Hill Country and the I-35 corridor.

(737) 317-7625
How We Work

How a Job With Intex Runs

From the first call or text to the finished work, here is how it goes.

1

Call or text

Call or text (737) 317-7625. Tell us where your land is and what needs clearing.

2

We look at the land

We come out to the property. Show us the trees to keep and where a road or pad should go.

3

Your free estimate

Your free estimate comes as a written quote. It spells out the work before anything starts.

4

The work

We bring the machines that fit your land. Cedar and brush get mulched or pushed into burn piles, and the rock mill turns loose rock into base.

5

Ground ready to use

When we finish, the ground is ready for the next step. That might be a house pad or topsoil for new grass.

FAQ

Fence Line Clearing Questions, Answered

Common questions about fence line clearing around Kyle and the Texas Hill Country. If yours is not here, call or text and ask.

Call (737) 317-7625

How much does fence line clearing cost?
The price follows the line: its length, the cedar and brush on it and the rock in the way. The width of the strip, slope, access and the trees you keep move it too. We come out for a free estimate and put the quote in writing.
Do you build or repair the fence too?
No. Building and repairing fences is another trade's work, and so are the post holes. We clear the line so your fence builder starts on clean, level ground. Tell us the builder's plan, and we clear to fit it.
How wide a strip do you clear along a fence line?
The width depends on the fence and the equipment your fence builder brings. Ask the builder how much room their crew needs, then tell us when we look at the job. We put the width in the written quote.
Can you clear along a fence that is still standing?
Yes. The skid steer mulcher works tight spots along standing fences and around the trees you keep. Flag any loose wire on the ground or in the brush before we start, so we can work around it.
What happens to the cedar and brush you clear?
You choose. The mulchers grind it where it stands and leave the mulch on the ground. Or we cut it and push it into burn piles, and the burning is yours to do. A county commissioners court can ban or limit outdoor burning outside city limits, so check before you light a pile.
Where do you clear fence lines?
Intex is based in Kyle and works about 45 miles around it, across the Hill Country and the I-35 corridor. That takes in towns like Dripping Springs, Wimberley, Lockhart and Bastrop. Call or text (737) 317-7625 with the property's location, and we tell you if it is in range.
More From Intex

Work That Pairs With Fence Line Clearing

Wheeled forestry mulcher in green brush with freshly mulched ground in front, forestry mulching

Forestry Mulching

We grind brush and small trees into mulch right where they stand. The mulch stays on the ground as a cover for the soil.

Learn More
Oaks left standing after the cedar was cleared out, cut brush at the edges, cedar clearing

Cedar Clearing

We take cedar off pastures, lots, fence lines and homesites, mulched in place or pushed into burn piles. The oaks and the trees you pick stay standing.

Learn More
Tractor with a rock mill grinding rocky ground into crushed base, rock milling

Rock Milling

We grind loose surface rock and boulders into 3/4 minus caliche right where they lie. The ground can then become a lawn, a pasture, a pad or a road.

Learn More
Why Choose Intex

Land Clearing and Rock Milling Around Kyle

The whole job, one company

One call covers the cedar and the rock. The same company can cut in the road or pad afterward.

Machines from 120 to 400 horsepower

The skid steer fits tight lots and fence lines. The 400 horsepower wheeled mulcher clears open acreage fast.

A free estimate, in writing

We look at the land and talk through the job with you first. Then the quote comes to you in writing, with the work spelled out.

Based in Kyle

We work about 45 miles around Kyle. That reaches from Marble Falls and Johnson City out to Bastrop and Luling.

Google Reviews

Rated 5.0 on Google Around Kyle and the Hill Country

Real reviews from real jobs, 48 reviews on Google.

Read All Reviews

I had Intex Rock & Cedar Solutions come out and rock mill about 2 acres of my field, and they did an outstanding job. The difference before and after was incredible. They showed up when they said they would, worked hard, and treated my property like it was their own.

Aaron Hertz2 months ago · Google review

Outstanding job by Trey with Intex Rock & Cedar Solutions! My wife and I were in need of a spot cleared for our future home and Trey exceeded our expectations. He also helped us with removing some old existing piers and leaving the ground nice and level. Highly recommend!

Tyler Faris2 months ago · Google review

We recently had them out for a major project involving cedar clearing and rock crushing, and the results are incredible. They didn't just clear the land; they transformed the terrain. Their rock milling and crushing equipment turned rough, unusable limestone into a smooth, walkable surface.

Request a Quote

Get In Touch With Intex

Tell us about your land and the town it is near, and we will set a time to see it. Call or text (737) 317-7625 or use the form for a free estimate.

  • Call or text (737) 317-7625
  • Serving Kyle, TX, the Hill Country and the I-35 corridor
  • Written quotes · land clearing, rock milling and site work

Request a Quote

Tell us about the land, the work it needs and where it is. We look at the job and put a free estimate in writing.

Call (737) 317-7625